Channeling Innovate4x4s main streams http://forum.innovate4x4.com/index.php Sat, 19 May 2012 23:24:29 +0000 10 http://forum.innovate4x4.com/index.php?showtopic=3654
Disco bits (may also suit RRC)

2. 2x 300 tdi disco drag links with TREs (£5 each)
3. 2x 300 tdi disco track control rods (£5 each)
25. 1x 200 tdi disco washer bottle with headlamp washer pump still attached (£5)
26. 1x 300 tdi disco washer bottle with all 3 pumps still attached (£15)
27. 2x 200 tdi disco long door pull handles in blue. £2 the lot
28. 1x complete set of disco 200 tdi middle row seatbelts (£10)
29. 1x as new Monroe steering damper for Dsico/RRC (£10)
32. Set of 300 tdi disco clocks at 123K working order (£5)
33. 3x disco 300 upper rear light clusters 1x NS 2x OS, all good. (£10 the lot)
34. 6 disco 300 binnacle switches 4x radio 1x heated screen 1x rear washer (£5 the lot)
36. 1 200 tdi rear light cluster NS. Some damage on edge but would pass MOT (£2)
37. 200 tdi disco NS mirror. Good. (£5)
38. 1x genuine AP clutch master cylinder for 300 tdi disco. Brand new in box. (£30)
39. 300 tdi disco PAS pump. Genuine. Changed as believed to be leaking but turned out to be split pipe. (£15)
40. Pair of 300 tdi disco mirrors. Casings good, no glass and one has damage to mounting (broken plastic clips)> Make one good one from the 2 if you need one. (£5 the pair)
41. 1x 200 tdi intercooler. Conditon OK (£5)
61. 5x 24 spline disco/RRC CV joints and loads of matching front shafts (£25 the lot)
62. 1x front propshaft from V8 300 series disco, good. (£15)
63. 1x rear prop from Disco V8 with rubber donut (£15)
44. 1 300 tdi disco subwoofer assembly with amp and speakers. Untested but look fine. Grill a bit dented and plastics are scratched. (£15)
45. 1 disco 300 OS indicator (£5)
46. Pair of good 300 tdi disco headlamps (£15)
55. 1x 300tdi disco window winder mechanism with motor, drivers side (£5)
47. 1x disco wiper motor assembly, working (£5)
48. Pair of brand new genuine side strips for 300 tdi windscreen (£5)
50. 3x early disco stubby CV joints and 2x short hub shafts to match. (£15 the lot)
57. 1x pair of long & short rear 24 spline shafts with mushroom ends (£15)
58. Disco 300 grill and headlamp finishers in black. Good condition (£10)
66. 300 series disco front fog light lens NS (£2)
64. 200 tdi disco stalks, good (£5)


Defender bits

12. Early defender speedo head showing 148K miles (£10)
13. early 110 heater plug resistor, may suit series diesel too… (£2)
20. 1 pair of front callipers from a 200tdi 110. One serviceable, the other needs rebuilding due to rusty pistons (£10 the pair)
21. 1 complete set of 4 pistons and seals to rebuild a defender front calliper but not sure which type of calliper. PN 606683 (pistons) & AEU1547 (seals). These are Britpart/allmakes. (£5 the lot)
22. Pair of wiper wheel boxes from early defender, working OK. (£5 the pair)
23. A gear set for early defender wiper motor, working fine (£5)
79. Galvanised spare wheel well for 110 pickup (£15)
80. Covers for battery box and tool box from 200 tdi type seat box (£5 pair)
81. 200 tdi gearbox mounts with new rubbers (also fit V8 engine and box) (£10)
52. 1x defender sidestep. OK condition but will need folding mechanism freeing up. (£10)
69. 200 tdi type rear prop for 110 good (£15)
70. Rear tailgate for Defender pickup, good condition (£45)
71. 1x pair of 110 trailing arms with good bushes (£20)
72. 1x rear bench seat for 90 or 110, as new. (£15)
73. A complete set of 3 cloth trim front seats for defender. Very good condition with only one tiny nick on rear of drivers seat. Complete with runners (£150 the set)
74. 110 chequer plate sill covers, used! (£10)
75. Battery box and tool box removed from 200 tdi type seat box. Repaired and both in reasonable condition. (£20)
76. 110 trailer brake vacuum tank (£5)
83. Complete front axle from an early 110. Still has steering arms, brakes (good condition but needs pipes), radius arms, panhard rod and wheels with good tyres. Would bolt straight onto a 110, 90 or disco. Has the strong AEU-type CVs. (£100)


Universal bits/offroad bits

1. 2x panhard rods (£5 each)
5. An old Warn motor from early 8274, possibly 2.6hp??? Untested & painted blue (£5)
6. Home made bracket for 2nd alternator to fit 300 tdi Aircon compressor position. Complete with a subaru 65 amp alternator with 4pk pulley and multiplug/wires. I have a belt somewhere that fits and runs on the 300 tdi fine. It was a freelander belt so easy to get another if I can't find it. (£30 the lot)
7. Left overs from a 200 tdi head gasket change, several gaskets and a full set of valve seals, I only used the head gasket. (£1)
14. 1 standard rear shock top mount and chassis bolts (£2)
15. Front and rear spring seats for disco/90, loads of them. £1 a pair.
19. 1 pair of almost new (300 miles on truck) 300 tdi rear callipers. Not genuine but not britpart either…. (£40 the pair)
30. 1x pair of new ProComp gas shocks. NOT a Land Rover fitment. Pin to eye fittings with pin at the top. Bush to bush centre measurements are 16” closed, 25.5” open. (£20 the pair)
42. 1x tdi expansion bottle/header tank. Black type but in good condition (£5)
43. 1 metal expansion tank, possibly from V8? (£5)
49. 1 10 spline diff – Rover type. Undamaged. £20
51. 1 standard 8274 mainshaft (what is left after fitting a GP uprated one) (£15)
56. 1x pair of standard pin to pin front shocks (£5)
60. Wheel brace for land rover (27mm) and a wheel chock (£5)
67. 1x pair of alloy spacers for 8274 to fit to ARB type bumper (£15)
77. 1x pair of heavy duty front shock turrets. Unknown make but very strong, Standard height. (£20 pair)]]> Sat, 19 May 2012 23:24:29 +0000 http://forum.innovate4x4.com/index.php?showtopic=3654 http://forum.innovate4x4.com/index.php?showtopic=3649 walters arena november]]> Wed, 16 May 2012 20:57:03 +0000 http://forum.innovate4x4.com/index.php?showtopic=3649 http://forum.innovate4x4.com/index.php?showtopic=3648

Or what wheelbase are you at and how does it work for you?]]> Tue, 15 May 2012 17:51:05 +0000 http://forum.innovate4x4.com/index.php?showtopic=3648 http://forum.innovate4x4.com/index.php?showtopic=3646
It is attached to ZF auto box (used) which is also for sale either with or without the engine.

Open to offers for one or both.

Wolverhampton 01902 892652]]> Fri, 11 May 2012 13:24:30 +0000 http://forum.innovate4x4.com/index.php?showtopic=3646 http://forum.innovate4x4.com/index.php?showtopic=3643
£40 for the vehicle, 1030 start.]]> Wed, 09 May 2012 19:51:17 +0000 http://forum.innovate4x4.com/index.php?showtopic=3643 http://forum.innovate4x4.com/index.php?showtopic=3641
any suggestions for suppliers?

and does anyone know what size the thread is? 1/4 NPT?]]> Mon, 07 May 2012 14:11:48 +0000 http://forum.innovate4x4.com/index.php?showtopic=3641 http://forum.innovate4x4.com/index.php?showtopic=3640
Some of you may know that I bought Bob's Red TD5 90 from him in mid February.

I've been using the Red and Blue one (the 200Tdi!) for the last couple of months, but now it's time to get stuck in on the build of the Red one.

I was original going to fit challenge wings and a roll cage to the Blue one, but now things have changed!

So, from now until the start of July I have two months to hopefully get the following done for the Scott Williams Memorial Winch Challenge.

- Challenge wings, these will look like standard wings.
- An internal/external roll cage, front hoop, internal rear hoop with back stays all joined together with full length roof bars.
- A TD5 rear winch bumper, this will look simular to the one on the Blue one but with the centre portion pretruding out.

These are the three main things I want to get done, but there will be other bits and pieces I'll be doing along the way as well as doing other bits after July!

Today was mostly spent on tucking the front bumper as near to the front chassis crossmember and intercooler as possible. There was a two inch gap between the winch and intercooler and so with a bit of cutting and redrilling I managed to move it back 1 and 3/4 inches!

Before:




After:




Next I'll be removing the wings to fit the challenge wings, here you can see them mocked up on the Blue one a while ago.



I'll be also mocking up the rear hoop so that I can get as much done before I remove the rear tub for the chassis roll cage mounts and rear winch bumper.

The rear bumper will look a bit like the Blue one's:



As this will be my everyday vehicle I'll be adding litle bits like heated wing mirror, rear speakers, rear seats, LED rear lights, waffle board holder for the roof and obviously my new dash as it fits straight in, just needs a little modifying to accept the TD5 gauges.

Steve]]> Sun, 06 May 2012 20:54:09 +0000 http://forum.innovate4x4.com/index.php?showtopic=3640 http://forum.innovate4x4.com/index.php?showtopic=3637
I'm thinking about fitting an AW4 autobox pulled from a Cherokee to my Jeep, replacing an AX15 manual box. My understanding is that manual boxes will operate at pretty much any angle, whilst autos can suffer from oil starvation when run at severe angles and causing drive to be lost. One possible solution to this is to fit a deeper/larger oil pan to increase oil volume? What do folks think? If I go auto, will cool auto box via radiator and seperate cooler fitted with a fan.

Mike C]]> Fri, 04 May 2012 20:24:25 +0000 http://forum.innovate4x4.com/index.php?showtopic=3637 http://forum.innovate4x4.com/index.php?showtopic=3633 Been sent a dash minus one knob, going to struggle to find one I think. Anyone got one I can nab, don't mind if I have to buy the pair.]]> Sun, 29 Apr 2012 13:05:43 +0000 http://forum.innovate4x4.com/index.php?showtopic=3633 http://forum.innovate4x4.com/index.php?showtopic=3629
Got to replace a pair of motosr up front but not too sure what to replace them with, We've used both and the 2's are quicker with no load but i reckon the 1's seem pull better under load.

]]> Mon, 23 Apr 2012 21:47:40 +0000 http://forum.innovate4x4.com/index.php?showtopic=3629